面议
面议
面议
面议
面议
品牌协昌环保 | 有效期至长期有效 | 最后更新2020-09-27 16:08 |
产品型号SXC-X8A6 | 工作介质清洁空气 |
SXC-X8A6在线电脑脉冲控制仪是一款控制电磁脉冲阀按次序依次喷吹的袋式除尘器用控制器。其性能可靠,使用寿命长,金属密封外壳可适用多种工况环境。
型号标示MODEL | 标示代表含义 |
SXC | 公司代号:苏州协昌环保科技股份有限公司SUZHOU XIECHANG ENVIRONMENTAL PROTECTION TECHNOLOGY CO.,LTD. |
X | 新式改进款NEW MODEL |
8A | 在线式脉冲输出系列ONLINE PULSE CONTROL SERIES |
6 | 碳钢挂式外壳HANGING STEEL HOUSING |
NO. | 回路数(最多可控制的电磁脉冲阀数量)THE MAXIMUM NUMBERS OF SOLENOID VALVE TO BE CONTROLLED |
二. 参数说明
参数Parameter | 参数值Value | 备注Note |
输入电压Input voltage | AC220V(50/60HZ) | |
输出电压Output voltage | DC24V | |
工作电流Current | 1A | |
额定功率Power | 8W | |
脉冲宽度Pulse duration | 2-255(×10mS) | 10mS每单位可调Adjustable |
脉冲间隔Pulse interval | 1-255S | 1S每单位可调Adjustable |
循环周期Cycle | 0-255Min | 1Min每单位可调Adjustable |
输出回路Channel | 5/10/20/30/40 | 可调Adjustable |
三. 操作指南
1. 显示说明Display help:
本机为三位数码管显示,运行状态时,数码管显示当前喷吹的回路;调整状态时,显示当前正在调整的参数值。
This controller is three digital tube display. When in running state, the digital tube shows the current cleaning channel; When in adjusting state, the digital tube shows the adjusting parameters.
2. 指示灯Indicator lamp:
指示灯Indicator lamp | 运行状态时亮 Lamp is on in running state |
调整状态时亮 Lamp is on in adjusting state |
脉宽Pulse duration | 电磁阀打开 Solenoid valve opens |
正在调整此参数值 Adjusting this parameter |
间隔Pulse interval | 电磁阀关闭后等待间隔 Solenoid valve closes, waiting for interval |
正在调整此参数值Adjusting this parameter |
周期 | 一个循环喷吹结束后等待周期至下一循环开始One circular cleaning ends, waits to the next cycle | 正在调整此参数值 Adjusting this parameter |
回路Channel | -------- | 正在调整此参数值Adjusting this parameter |
电源Power supply | 工作电压正常 Normal working voltage |
工作电压正常 Normal working voltage |
3. 参数调整:
按键Button | 按键操作说明Instruction |
复位 Reset |
运行状态时,使用此键回到回路重新喷吹;调整状态时回到“脉宽”参数调整状态。When in running state, press this button to re-start the cleaning from 1st channel; when in adjusting state, press this button to return to “pulse duration” parameter adjustment. |
运行/调整 Run/Adjust |
运行状态时按住此键2S以上松开时切换到参数调整状态;反之亦然。Press the button more than 2S and then undo the button in running state it will switch to parameter adjustment state; or vice versa. |
设置 Set |
参数调整状态时切换需要调整设置的参数。 Set up the parameters in adjusting state |
+ | 参数调整时,使当前参数每单位递加。 Increase the parameter value per unit |
- | 参数调整时,使当前参数每单位递减。 Decrease the parameter value per unit |
复吹 RB(Repeated Blowing) |
运行状态时,按住此键2S,使其只喷吹当前回路,暂停循环;再按住此键2S,切换回原运行循环中。 Press the button for 2S in running state, it will clean only the current channel and pause; press the button again for 2S, it will switch to the original cycle. |
四. 接线说明
端子名称Terminal name | 功能说明Function description |
L | AC220电源L接入端 L connection terminal of AC220V power supply |
N | AC220电源N接入端 N connection terminal of AC220V power supply |
〨 | 地线接入端 Connection terminal of ground wire |
COM | 电磁脉冲阀公共输出端Common output termical of solenoid valve |
1-20/40 | 电磁脉冲阀1-20/40回路信号输出端 Output terminal of 1-20/40 channel of solenoid valve |
YC | 压差干接点(选配)Dry contact of pressure differential (Optional) |
GND |
五. 注意事项
此仪器需要专业人员进行操作,切勿随意通电或调整参数,以防损坏给您带来不便。且不能在未经本公司允许下自行插拔排线,拆装线路板或电子元器件。
¥45.00/个
¥120.00/个
¥80.00/个
¥100.00/个
¥80.00/个