1.2:80-120
起订:20公斤
供应:9999公斤
发货:1天内
立即购买
YD990耐高温耐磨焊丝 YD980磨煤辊堆焊焊丝YD990高温耐磨焊丝 堆焊焊丝产品描述
| HB-YD327A(Q)1.6≥55专门用于模具堆焊，耐磨性能高于D322Used tomouldsurfacing, wear resistance is better than D322.HB-YD337(Q)1.6≥48用于铸钢或锻钢上堆焊锻模Applied to repairforging dieatcast steelorforging steel.HB-YD397(Q)1.6≥40用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing.HB-YD405A(Q)1.650-59用于热轧辊开坯辊堆焊Applied to repair hot-rolling blooming rollor.HB-YD430A(Q)1.620-35打底层堆焊焊丝A backing hardfacing flux-cored WiresHB-YD488A(Q)1.645-50用于轧辊堆焊Applied to repair rollorHB-YD507Mo(Q)1.635-45用于510℃以下中高压阀门堆焊Applied to valve which operating tdivperature is less than 510℃.HB-YD518(Q)1.640-50用于连铸辊堆焊Applied to repaircontinuous caster rollerHB-YD688(Q)1.650-60用于磨煤辊打底焊(韧性好，可以多层堆焊)Used to coal roller backing welding.HB-YD788(Q)1.655-62硬度高，可以多层堆焊。High hardness andmulti-layer weldingHB-YD888(Q)1.2, 1.660-65硬度高，堆焊层厚度不超过6mm。High hardness, but thethicknessofsurfacing layeris less than 6mm.HB-YD888Ni(Q)1.258-65高铬合金焊丝，用于耐磨表面堆焊Applied to repair surface of wear parts.HB-YD988(Q)1.655-63高铬合金焊丝，用于耐磨表面堆焊Applied to repair surface of wear parts.HB-YD990(Q)1.655-65用于高温耐磨堆焊。Applied to repair surface ofhigh tdivperaturewear parts.HB-YD58(Q)1.655-60高温耐磨焊丝，用于化推焦机磨靴的堆焊。high tdivperaturewear hardfacing wires,HB-YD67(Q)1.658-63用于耐磨表面堆焊Applied to repair surface of wear parts.HB-YD95(Q)1.655-63高铬合金焊丝，用于耐磨表面堆焊Applied to repair surface of wear parts.HB-DG7(Q)1.652-60地铁盾构施工刀具刃口堆焊专用，也可用于煤 |